Xfinity Router Won’t Turn On

The Xfinity Router is one of these features that enable us to carry out activities online. While I was in the middle of doing this online activity, the Xfinity router suddenly shut down and now it won’t even turn on.

In a circumstance like this, you test out a variety of potential solutions, but none of them end up being useful. In order to find a solution to this issue, you are going to require the best possible choice, which you have not chosen as of yet.

The issue of your Xfinity Router Won’t Turn On should be resolved in a matter of minutes after implementing the following solutions, which we will now discuss with you:

How to Fix Xfinity Router Won’t Turn On

Let us know how this problem can be solved as soon as possible.

Fix Xfinity Router Won’t Turn On

Verify all cables

Your Xfinity router is connected by a special type of cable that only gets its power.

If this cable is damaged or not working properly, then Xfinity router will not turn on in the such conditions.

To fix this problem as soon as possible, check the entire power cable properly. If it can only be fixed then fix it otherwise replace it with new cable after that xfinity router will start.

Test the power outlet

If the power cable is fine but still the xfinity router is not turning on. In this case, you will need to check the power outlet.

This power outlet is the same one you connect your Xfinity router’s adapter to.

In the event that you suspect that this outlet has a problem, you should contact an electrician to have the outlet inspected. As soon as the outlet begins functioning normally, you will discover that the Xfinity router also turns on and begins providing the services for which it was designed.

Check for Overheating

Your router is susceptible to overheating issues, just like any other kind of internet-connected device there is. The Xfinity router suffers damage or instability as a result of the overheating caused by this.

Therefore, it is imperative that you check the temperature of your router. If it’s getting too hot, you should probably turn it off for a while. In the event that you do not wish to carry out these steps, you should relocate your router to a location that allows for adequate circulation of air.

Additionally, you should take extra care to ensure that your router is not near a hot spot such as a computer, microwave, or stabilizer. This is because these devices generate a lot of hits, causing the xfinity modem to start receiving a high amount of heat and the situation gets worse which causes a problem.

Check Your WiFi Router’s Lights

Your Xfinity modem comes equipped with a few lights, all of which are displayed on the front of the device. This indicator light tells you the current status of both your network and your router.

If the light is solid green, everything is functioning normally; however, if the light is orange or red and blinking, it indicates that there is an issue with the router.

So you should discuss the actual status of these lights with the xfinity team. If any major inconvenience is found then the team tries its best to help.

Reboot Your Router and Modem

To fix the xfinity router won’t turn on the problem properly; you will need to reboot this router.

Rebooting will try to fix everything by doing a variety of tests. Rebooting is supposed to be the best way to fix any problems with your modem.

Let us know how to reboot it directly so that your problem can be resolved as soon as possible:

  • Unplug your xfinity model and router from the power outlet.
  • Wait here for at least 15 seconds.
  • After waiting, plug the modem into the power outlet again.
  • Now, wait for 1 or 2 minutes.
  • After this, you will see that there are different types of light indicators in the router.
  • If this light turns green, then you know that your router is stable and working properly.

Troubleshoot through My Account

If the above methods are not proving to be effective for you, in such a situation, we are telling you a method that will easily overcome this problem.

It also happens that we do not know what the problem inside the router is because we are not a technician.

The problem may be hardware related or software related. In such a situation, Xfinity has given a very good tool called Diagnostic Check.

 With its help, you can easily know where the fault is coming by doing various types of testing.

To run it, you have to follow the steps given below:

  • You have to go to your account.
  • Here you have to click on the Device tab.
  • On clicking, the option of Run Diagnostic will appear in front of you, on which you have to click.
  • After clicking it will start scanning your system. Will show you if everything is ok.
  • If there is some problem then it will also present you with various solutions by adopting which you can solve the problem of xfinity router won’t turn on.

Router may be damage

In this day and age, we do not give the proper amount of attention to our things in the manner in which they should be given. In this particular scenario, the Xfinity router suffers damage as a result of inadequate maintenance.

Router damage can happen due to any number of reasons. It is common for it to break or run out of water. If the router is damaged and you did not think that it was damaged, then you can get the hardware checked for it.

The Xfinity team does thorough testing in this regard and makes sure if there is any hardware problem. In the presence of a problem, it removes the problem and also prompts your router to provide smooth service.

Contact Xfinity

You can contact their support team in order to resolve the issue with your Xfinity Comcast router not turning on. The customer service team makes an effort to accomplish as much as they can by gathering as much information as they can.

Once the problem is identified, they diagnose it and get the modem back to work as soon as possible. If you want to get in touch with them, you can do so in the following ways:

  1. CHAT WITH XFINITY
  2. FIND AN XFINITY LOCATION
  3. STATUS CENTER
  4. Visit  Help Communities like Xfinity Support Forums
Hey, I'm carol jenny! I've endorsed the world's best and most popular products and spent a lot of time with it. I know how today's technology works. That's why I also try to give step by step solution to every type of problem. I hope you have found what you are looking for.

Leave a Reply

Your email address will not be published.